Transferring Files To The Remote Computer; Transferring Files From The Remote Computer; Logging On And Logging Off Using Putty; Logging On Using Putty - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
3.3
11 - 4
6. Type the Host name or IP address of the voice messaging
system. Verify new remote maintenance IP addresses.
If dial-up is being used, type 10.0.0.1 .
7. Type the User name, admin.
8. Type the Password, voicemail.
9. Under Protocol, select SFTP (allow SCP fallback).
10. Click Login.
When the first connection is made, a warning message appears.
This message does not appear for subsequent connections. Click
Yes .
After authentication is complete, the WinSCP File Transfer page
appears.
3.2.2

Transferring Files to the Remote Computer

This procedure assumes that the Norton Commander interface has
been selected. The Norton Command interface displays the source
directory structure in the left pane and the destination directory in the
right pane. This enables the use of drag and drop to copy files.
1. Select the file or files to copy.
2. Right-click the file name, then select Copy.
Alternatively, if the Norton Commander interface is active, you can
drag and drop files.
3.2.3

Transferring Files from the Remote Computer

1. Select the file or files to copy.
2. Click Files > Copy, then click Copy.
Alternatively, if the Norton Commander interface is active, you can
drag and drop files.

Logging On and Logging Off Using PuTTY

Log on and log off after connecting to the UM8000 blade.
3.3.1

Logging On Using PuTTY

1. Click Start > Programs > PuTTY > PuTTY.
The PuTTY configuration dialog box appears.
2. Type the Host name of the voice messaging server, then click
OPEN.
The PuTTY client shell appears with a login as prompt.
UM8000
Remote Maintenance