NEC Univerge UM8000 Installation Manual page 112

Issue No. 1.0
13 - 6
5. Type cd\ <ENTER>.
6. Type setup <ENTER>.
7. Type y to proceed with the voice messaging system
set up utility.
8. On the
Choose Setup Type
Configure System
9. Press OK to confirm that the voice messaging
system is installed on drive E:.
10. Press OK to confirm that the voice messaging
system is installed in the
11. The Setup menu displays the features and options
available on the system. Review the available
options, then <ENTER>.
12. The Update Configuration menu appears. Click
Configure Network Protocols (for Network Backup/
<ENTER>.
Restore)
Make sure that all other options are cleared, then
<ENTER>.
13. From the Select Network Protocols to Install/
Configure menu, type 2 (TCP/IP) and 3 (NetBIOS
over TCP/IP), then <ENTER>.
The TCP/IP Setup menu appears.
14. Type 1<ENTER>
15. Type the correct value for the TCP/IP Address field,
then <ENTER>.
16. Type 2 <ENTER>.
17. Type the correct value for the Subnet Mask field, then
<ENTER>.
18. Type 3 <ENTER>.
19. Type the correct value for the Default Router field,
then <ENTER>.
20. Type 4 then <ENTER>.
21. Type the correct value for the Domain field, then
<ENTER>
menu, type 2 to select
, then <ENTER>.
directory.
E:\VMAIL\
Database Migration
UM8000