Overview; Setting Up Integration; Configuring Integration - NEC Univerge UM8000 Installation Manual

Setting Up Integration (SV8100)
O
S 1
VERVIEW
ECTION
This chapter describes setup and programming for integrating the SV8100
telephone system and the voice messaging system.
S
S 2
ETTING
ECTION
C
S 3
ONFIGURING
ECTION
Additional voice messaging system features are set up on the
Administration Console screens:
Installation Manual
U I
P NTEGRATION
Extensions must be installed and set up for each voice messaging
port.
Hunt groups, trunk routing, and call overflow must be programmed so
that the proper calls are routed to the voice messaging system.
Test the voice messaging system extensions for the integration.
Confirm that the voice messaging extensions are configured properly
to integrate with the voice server.
Learn the telephone system tones, if necessary. Use the Global Tone
Detect utility to configure the voice server to recognize the system
tones.
I
NTEGRATION
Easy Message Access
Identified Subscriber Messaging
Trunk Mapping for Transaction Boxes
7
7 - 1