Setting Up Soft Keys; Enabling Soft Key Call Screening; Enabling The Voice Messaging Ports For Soft Keys; Setting Up Live Record - NEC Univerge UM8000 Installation Manual

UM8000
S
S 3
ETTING
ECTION
Use the phone system programming interface (either a CAT phone or a SV8300
PCPro) to enter the phone system programming commands.
3.1
3.2
S
S 4
ETTING
ECTION
A subscriber can record phone conversations using their phone or using ViewMail. For
more information about ViewMail, see About Visual Messaging on page 84.
Installation Manual
U S K
P OFT EYS

Enabling Soft Key Call Screening

Enable soft key call screening systemwide.
Command Code:
First Data:
Second Data:

Enabling the Voice Messaging Ports for Soft Keys

Enable all voice messaging ports for soft keys.
Command Code:
First Data:
Second Data:
NOTE
Repeat this command for each voice messaging extension on the
U L R
P IVE ECORD
To record conversations using ViewMail, a barge-in code and executive override
must be configured on the phone system, and call forward busy must be disabled
on each phone extension recording from ViewMail. A barge-in code is a key
sequence that the phone system dials to activate executive override (or silent
monitor) to begin the recording. See your phone system documentation for more
information.
To record conversations using a phone, the phone system and the subscriber's
extension must be configured properly. The procedures to do this are described
later in this chapter.
08
715
0
1337
<xxx>
Where <xxx> is the voice messaging port
extension number.
0
Issue No. 1.0
UM8000
blade.
8 - 7