Changing The Admin Password; Logging Off - NEC Univerge UM8000 Installation Manual

UM8000
Installation Manual
3. At the login prompt, type admin <ENTER>.
The Maintenance menu appears in a PuTTY window.
4. When prompted for the password, type voicemail <ENTER>.
The Maintenance menu appears when the correct password is
typed.
3.3.2

Changing the Admin Password

Changing the support password secures the computer at the
operating system level. The system manager should take additional
steps to secure UM8000 at the voice messaging application level.
Refer to System Management Help for more information.
This procedure assumes that the mouse is used as an input device.
1. On the Maintenance menu, click 2 Maintenance, then click OK.
The System maintenance menu appears.
2. On the System maintenance menu, click 2 Set admin
password, then click OK.
The Set admin password window appears.
3. Type the new password, then click OK.
4. When prompted, retype the new password, then click OK.
A message appears stating that the password has been changed.
5. Click OK to return to the System maintenance menu.
6. Click 0 Return to previous menu, then click OK to return to the
Maintenance menu.
7. Click 0 Log out, then click OK to log out and close the PuTTY
window.
3.3.3

Logging Off

To log off from the operating system, do the following:
3.3.3.1 Logging Off Using PuTTY
1.
2.
Return to main Maintenance menu screen.
Choose 0 Log Out, then choose OK.
Issue No. 1.0
11 - 5