NEC Univerge UM8000 Installation Manual page 47

UM8000
Perform the following procedure to install the CD-VM00.
1.
2.
3.
Installation Manual
Wear a grounding strap while handling the CD-VM00 and DSP. Lay the compo-
nents on a flat work surface.
Mount the CR-2032 battery with the "+" side up in the "BATT" slot on the
CD-VM00. Refer to Figure 6-2 Install the CR-2032 Battery on page
To install the SO-DIMM memory on the CD-VM00 blade, insert the end with the
brass connectors into the CN14 1 slot. Then, push the other end down until the
locks on both sides lock into place. Refer to
Memory on page 6-3.
Figure 6-2 Install the CR-2032 Battery
Figure 6-3 Install the SO-DIMM Memory
Figure 6-3 Install the SO-DIMM
Issue No. 1.0
6-3.
6 - 3