NEC Univerge UM8000 Installation Manual page 109

UM8000
Installation Manual
4. Open a text editor. Type e TRUSERS <ENTER>.
NOTE
This command creates a new file, TRUSERS and
opens the text editor.
5. Type the following lines into the file:
user support voice
rd e:\
wr e:\
6. Save the file and exit the text editor.
7. Start the OS/2 FTP server. Type c:\tcpip\bin\ftpd
<ENTER>.
1.2.3.2 Transferring the Backup File Using FTP
To transfer the backup file using the FTP server:
1. At the Windows computer, open a command prompt
window and type
ftp <IP address> <ENTER>
where <IP address> is the IP address of the OS/2
voice messaging system.
2. When asked for the user name, type support
<ENTER>.
When asked for the password, type voice <ENTER>.
3. Type lcd <directory name> t <ENTER>.
Where <directory name> is the destination directory
on the Windows computer where the compressed
backup file will be stored.
4. Type binary <ENTER>.
This sets the file transfer mode to binary.
The file transfer mode must be set to binary or the
migration will fail.
5. Type get <filename> <ENTER>.
The file name must be TRUSERS without a file
extension.
Issue No. 1.0
13 - 3