Setting The E-Mail Server Configuration - NEC Univerge UM8000 Installation Manual

UM8000
E-
S 3
ECTION
The following is a summary of the steps required to set up the e-mail integration.
1.
2.
3.
C
S 4
ONFIGURING THE
ECTION
The e-mail server must have SMTP, POP3 and IMAP enabled to use the e-mail
integration.
To enable
system administrator about which settings are appropriate for the organization.
WARNING
4.1
Installation Manual
I
MAIL NTEGRATION
Configure the voice messaging system server.
Set up the information for the outgoing e-mail server connected to the voice mes-
saging system.
Configure the e-mail server.
The e-mail server must be configured to properly integrate with the voice mes-
saging system.
WARNING
The e-mail administrator is required to configure the e-mail server.
Supported e-mail servers are:
Microsoft® Exchange 2000 or 2003
Lotus® Domino™ 6.0, 6.5, or 7.0
Novell GroupWise
Refer to the appropriate e-mail server documentation to configure the e-mail
server.
Set up subscribers.
After the e-mail server and the voice messaging system have been configured,
configure subscriber mailboxes to access e-mail.
and IMAP refer to the e-mail server documentation or consult the
SMTP
The e-mail administrator is required to configure the e-mail server.

Setting the E-mail Server Configuration

The following configuration settings must be set for the e-mail server.
E-mail Server
Microsoft Exchange
Lotus Notes Domino
GroupWise
S U
ET P
®
6.0, 6.5 or 7.0
E- S
MAIL ERVERS
IMAP, MIME, PLAIN, and LOGIN for outgoing messages
IMAP, PLAIN, and LOGIN for outgoing messages
IMAP4, PLAIN, and LOGIN for outgoing messages, SMTP
Relay - Allow message relaying
Required Protocols
Issue No. 1.0
10 - 3