Table of Contents
Advertisement
NOTE:
For the theft deterrent alarm system of
other than Israel and Germany models,
refer to "Theft deterrent alarm system" in
this section.
Oil change
(Oil life monitoring system reset setting)
(if equipped)
The oil life monitoring system must be
reset after changing the engine oil and oil
filter.
IS A/C (ENG A-STOP system setting)
(if equipped)
• When using the automatic heating and
air conditioning system (if equipped),
you can select one of the following
engine auto stop settings.
– Standard
– Economy
– Comfort
• When "Economy" is selected, engine
auto stop condition is eased, compared
with "Standard". Engine auto stop condi-
tion will occur more frequently, the stop
time will be longer, leading to reduction
of fuel consumption.
• When "Comfort" is selected, engine auto
stop condition becomes severe, com-
pared with "Standard". Engine auto stop
condition will occur less frequently, the
stop time will be shorter, leading to more
comfortable cabin condition by air condi-
tioner.
TPMS
(Tire pressure monitoring system set-
ting) (if equipped)
• You can check the current tire inflation
pressure on the information display.
• You can set one of the initial values of
tire pressure below that are indicated on
the tire information label.
– Comfort Mode
– Load Mode
Refer to "Tire pressure monitoring system
(TPMS)" in the "OPERATING YOUR VEHI-
CLE" section for details.
Display item (if equipped)
(Idling stop setting)
You can switch whether the information
display shows the engine stopping time by
the ENG A-STOP system.
(Idling disp setting)
You can switch whether the information
display shows the Eco-driving display
when the ignition switch is turned to
"LOCK" position or the ignition mode is
changed to LOCK (OFF).
(Idling warn setting)
You can switch whether the information
display shows the warning and indicator
messages related on the ENG A-STOP
system.
(Regen disp setting)
You can choose that the deceleration
energy regenerating indicator light comes
on or does not come on.
BEFORE DRIVING
Default (initialization setting)
If you select "YES" and push the informa-
tion switch (2), all settings will be reinitial-
ized.
75RM0-01E
2-80
Advertisement
Table of Contents
