Turn Signal Operation; Normal Turn Signal; Lane Change Signal - Suzuki IGNIS Series 2016 Owner's Manual

BEFORE DRIVING

Turn signal operation

With the ignition switch in "ON" position or
the ignition mode ON, move the lever
upward or downward to activate the right
or left turn signals.

Normal turn signal

EXAMPLE
68PM00234
Move the lever all the way upward or
downward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.
2-123

Lane change signal

EXAMPLE
68PM00235
Move the lever partway upward or down-
ward to turn right or left and hold the lever
in the moved position.
• The turn signal and its indicator flash
while the lever is held at the moved posi-
tion.
The turn signal and its indicator flash 3
times even if you return the lever immedi-
ately after moving it.
NOTE:
The turn signal and its indicator can be set
whether they flash 3 times after the turn
signal lever is returned via the information
display. Refer to "Information display" in
this section.
NOTE:
You can customize the setting for the num-
ber of flashing times of the turn signal and
its indicator (1 to 4 times). Please ask an
authorized SUZUKI dealer for the customi-
zation.
75RM0-01E