Table of Contents
Advertisement
OTHER CONTROLS AND EQUIPMENT
Blower speed selector (2)
(2)
The blower speed selector (2) is used to
turn on the blower and to select blower
speed.
If "AUTO" switch (8) is pushed, the blower
speed will vary automatically as the cli-
mate
control
system
maintains
selected temperature.
5-27
Air intake selector (3)
(a)
(b)
75RM027
Push the air intake selector (3) to change
between the following modes.
If "AUTO" switch (8) is pushed, the air
intake will vary automatically as the climate
control system maintains the selected tem-
the
perature.
NOTE:
When you select the recirculated air mode,
the automatic operation system is deacti-
vated if you push "AUTO" switch (8).
RECIRCULATED AIR (a)
When this mode is selected, outside air is
shut off and inside air is recirculated. This
mode is suitable when driving through an
area with polluted air such as a tunnel, or
(3)
when attempting to quickly cool down the
vehicle.
FRESH AIR (b)
When this mode is selected, outside air is
introduced.
FRESH AIR and RECIRCULATED AIR are
selected alternately each time the air
intake selector is pushed.
75RM028
NOTE:
If you select RECIRCULATED AIR for an
extended period of time, the air in the vehi-
cle can become contaminated. Therefore,
you should occasionally select FRESH
AIR.
75RM0-01E
Advertisement
Table of Contents
