Table of Contents
Advertisement
BEFORE DRIVING
Turn the indicator selector knob
(2).
Push the indicator selector
knob (2).
NOTE:
Depending on vehicle's specifications,
some items may not be displayed.
How to operate the setting mode:
1) When the ignition switch is in "ON"
position and the vehicle is stationary,
push the trip meter selector knob (1) to
switch the information display indication
(C) to the odometer.
2) Push and hold the indicator selector
knob (2) until the display shows
"
".
3) Turn and/or push the indicator selector
knob (2) to select a function that you
want to set up according to the above
chart.
4) Turn and/or push the indicator selector
knob (2) to register settings of the fol-
lowing functions.
2-99
Time indication of clock "
"
•
: 12-hour format (default set-
ting)
•
: 24-hour format
Central door locking system "
"
•
: Unlock all doors by turning
the key once
•
: Unlock all doors by turning
the key twice (default setting)
Additional flashes of the turn signal
"
"
•
: Turn
signal
flashes
times after the turn signal
lever is returned (default set-
ting)
•
: Disable the additional flashes
of turn signal
Oil change request light reset setting
"
" (if equipped)
•
: Reset of the oil life monitoring
system
Tire pressure monitoring system set-
ting (if equipped)
•
: Unladen Mode (default set-
ting)
•
:
Laden Mode
Refer to "Tire pressure monitoring system
(TPMS)" in the "OPERATING YOUR VEHI-
CLE" section for details.
Initialization setting "
•
:
Initialize all settings
EXAMPLE
NOTE:
• As shown in the above illustration, "
indicates on the display of currently set-
three
ting item.
• To go back to the higher level display
during operation, turn the indicator
selector knob (2) to display "
"
" and then push the indicator
selector knob (2).
5) To exit the setting mode, switch the dis-
play to show "
" and then push the
indicator selector knob (2).
"
75RM229
"
" or
75RM0-01E
Advertisement
Table of Contents
