Suzuki IGNIS Series 2016 Owner's Manual page 175

1) Be sure the parking brake is firmly
applied.
2) If the engine is running, stop the
engine.
3) Make sure the key is in the "ON" or
"ACC" position, or the ignition mode is
ON or ACC.
4) Remove the cover (1) over the button.
5) With the release button (1) pushed by
the key or the flat end rod, push the
knob button (2) and shift the gearshift
lever to the desired position.
This procedure is for emergency use only.
If repeated use of this procedure is neces-
sary, or the procedure does not work as
described, take the vehicle to your dealer
for repair.
Right Hand Drive Vehicle
(1)
EXAMPLE
Vehicles with a CVT have an electrically
operated park-lock feature. If the vehicle's
lead-acid battery is discharged, or there is
some other electrical failure, the CVT can-
not be shifted out of Park in the normal
way. Jump starting may correct the condi-
tion. If not, follow the procedure described
below. This procedure will permit shifting
the transaxle out of Park.
OPERATING YOUR VEHICLE
1) Be sure the parking brake is firmly
applied.
2) If the engine is running, stop the
engine.
(2)
3) Make sure the key is in the "ON" or
"ACC" position, or the ignition mode is
ON or ACC.
4) With the release button (1) pushed,
push the knob button (2) and shift the
gearshift lever to the desired position.
This procedure is for emergency use only.
If repeated use of this procedure is neces-
sary, or the procedure does not work as
described, take the vehicle to your dealer
for repair.
75RM053
3-24
75RM0-01E