Rear Window Wiper/Washer Switch - Suzuki IGNIS Series 2016 Owner's Manual

NOTICE
To help prevent damage to the wind-
shield wiper and washer system
components, you should take the fol-
lowing precautions:
• Do not continue to hold in the lever
when there is no windshield
washer fluid being sprayed or the
washer motor can be damaged.
• Do not attempt to remove dirt from
a dry windshield with the wipers or
you can damage the windshield
and the wiper blades. Always wet
the windshield with washer fluid
before operating the wipers.
• Clear ice or packed snow from the
wiper blades before using the wip-
ers.
• Check the washer fluid level regu-
larly. Check it often when the
weather is bad.
• Fill a reservoir 3/4 full with washer
fluid to for its expansion, if tem-
perature falls low enough to freeze
the fluid.

Rear window wiper/washer switch

EXAMPLE
Washer
Wiper
Intermittent wiper
68PM00240
To turn the rear wiper on, twist the rear
wiper switch on the end of the lever for-
ward to "ON" position. If your vehicle is
equipped with "INT" position, the rear
wiper operates intermittently when you
twist the switch forward to "INT" position.
To turn the rear wiper off, twist the switch
rearward to "OFF" position.
With the rear wiper in "OFF" position, twist
the switch rearward and hold it there to
spray window washer fluid.
With the rear wiper in "ON" position, turn
the switch forward and hold it there to
spray window washer fluid.
BEFORE DRIVING
NOTICE
Clear ice or snow from the rear win-
dow and rear wiper blade before
using the rear wiper. Accumulated
ice or snow could prevent the wiper
blade from moving, causing damage
to the wiper motor.
2-126
75RM0-01E