Setting Maximum Speed; Exceeding Maximum Speed; Changing Speed Setting - Suzuki IGNIS Series 2016 Owner's Manual

Setting maximum speed

1) Turn on the speed limiter system by
pushing "LIMIT" switch (1). When the
limit indicator (4) comes on, you can set
the maximum speed.
2) Accelerate or decelerate to the desired
speed.
3) Push down the "RES +/SET –" switch
(3) and turn on the set indicator (5). The
current vehicle speed is set as the max-
imum speed.
NOTE:
If you push down the "RES +/SET –" switch
(3) when the vehicle speed is less than 30
km/h or 20 mph, the maximum speed will be
set to 30 km/h or 20 mph.
Information display
EXAMPLE
(4) (5) (6)
(4) Limit indicator
(5) Set indicator
(6) Speed indication
When you push "LIMIT" switch (1), the sys-
tem is on and the limit indicator (4) will come
on. When the vehicle's maximum speed is
set, the set indicator (5) will come on.

Exceeding maximum speed

You can exceed the maximum speed tem-
porarily by quickly depressing the acceler-
ator pedal all the way down. While the
vehicle speed is exceeded, the speed indi-
cation (6) on the information display will
flash and the buzzer will sound briefly.
If the accelerator pedal is released to
return below the maximum speed, the
speed indication (6) will stop flashing and
then stay lit, and the function will restore.
NOTE:
• When you depress the accelerator pedal
slowly, the vehicle speed may not
exceed the maximum speed. If you wish
to exceed the maximum speed, depress
the accelerator pedal all the way down
quickly or push "CANCEL" switch (2) to
cancel the maximum speed temporarily.
• The speed indication (6) will also flash
and the buzzer will sound if the speed
limiter cannot prevent the vehicle from
exceeding the maximum speed in such
cases as when going down a steep hill,
or under excessive acceleration. In this
case, decelerate to return below the
75RM117
maximum speed using the brake pedal.
OPERATING YOUR VEHICLE

Changing speed setting

Setting to the current speed
1) Push "CANCEL" switch (2).
2) Accelerate or decelerate to the desired
speed.
3) Push down the "RES +/SET –" switch
(3) and turn on the set indicator (5). The
current vehicle speed is set as the max-
imum speed.
Using "RES +/SET –" switch
To change to a faster speed, press repeat-
edly or hold push up the "RES +/SET –"
switch (3).
To change to a slower speed, press
repeatedly or hold push down the "RES +/
SET –" switch (3).
NOTE:
• You can adjust the set speed by 1 km/h
or 1 mph by pushing "RES +/SET –"
switch (3) quickly.
• You can adjust the set speed by 5 km/h or
5 mph by pushing and holding "RES +/
SET –" switch (3)
• If the current vehicle speed exceeds the
maximum speed when changing to the
slower speed using "RES +/SET –"
switch (3), the speed indication (6) will
flash and the buzzer will sound.
75RM0-01E
3-52