Table of Contents
Advertisement
EXAMPLE
68PM00230
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) or pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument cluster will come on. To
momentarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
Auto-on headlight system
(if equipped)
EXAMPLE
(1)
The Auto-on headlight system automati-
cally turns on all lights that are operated by
the lighting control lever on the steering
column, when the following four conditions
are all met.
Conditions for Auto-on headlight system
operation:
1) It is dark around the light sensor (1).
2) The lighting control lever in the "AUTO"
position.
3) The ignition switch is in the "ON" posi-
tion or the ignition mode is ON.
BEFORE DRIVING
This system is operated by the signal from
the light sensor (1) on the passenger's
side of the instrument panel. Do not cover
the sensor (1). If you do, the system will
not work correctly.
WARNING
It takes about 5 seconds for the light
sensor to react to a change in light-
ing conditions. To help avoid an acci-
dent due to reduced visibility, turn on
your headlights before driving into a
tunnel, parking structure or the like.
NOTE:
This system does not react to all types of
ambient light. As the sensor is infrared
75RM110
type, it will not work correctly with ambient
lights that do not contain infrared rays.
2-116
75RM0-01E
Advertisement
Table of Contents
