Suzuki IGNIS Series 2016 Owner's Manual page 117

To monitor the next oil and oil filter change
timing properly, it is necessary to reset the
odometer reading and the time for the
light. The light will go out after the reset.
For the resetting procedure, it is recom-
mended to consult your SUZUKI dealer. If
you reset it by yourself, follow the proce-
dure described below:
To reset the engine oil life monitoring sys-
tem:
1) Turn the ignition switch to "ON" posi-
tion.
2) Push and hold the indicator selector
knob (2) for a while when the display
shows the oil change request light and
oil indicator.
EXAMPLE
(2)
3) Push and hold the indicator selector
knob (2), display will change as follows.
When the oil life monitoring system is
reset, the oil change request light and
oil indicator will go out and then the dis-
play indicates odometer.
EXAMPLE
(6) "OIL" appears
(7) "OIL" blinks
(8) Odometer
75RM348
Thermometer
The display (D) shows the thermometer.
The thermometer indicates the outside
temperature.
EXAMPLE
(6)
If the outside temperature drops to freez-
(7)
ing, the mark (g) will appear on the display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
(8)
driving at low speed, or when stopped.
• If there is something wrong with the ther-
75RM274
mometer, or just after the ignition switch
is turned to "ON" position, the display
may not indicate the outside tempera-
ture.
BEFORE DRIVING
(g)
76MH0A042
2-96
75RM0-01E