Table of Contents
Advertisement
2-wheel drive (2WD) CVT
CVT vehicles may be towed using either of
the following methods.
1) From the front, with the front wheels
lifted and the rear wheels on the
ground. Before towing, make sure that
the parking brake is released.
2) From the rear, with the rear wheels
lifted and a dolly under the front wheels.
NOTICE
Towing your vehicle with the front
wheels on the ground can result in
damage to the CVT.
2-wheel drive (2WD) manual tran-
saxle or Auto Gear Shift
Manual transaxle vehicles or Auto Gear
Shift vehicles may be towed using either of
the following methods.
1) From the front, with the front wheels
lifted and the rear wheels on the
ground. Before towing, check that the
parking brake is released.
2) From the rear, with the rear wheels
lifted and the front wheels on the
ground, provided the steering and
drivetrain are in operational condition.
Before towing, check that transaxle is in
neutral, the steering wheel is unlocked
(vehicle without keyless push start sys-
tem - the ignition key should be in
"ACC" position) (vehicle with keyless
push start system - the ignition mode is
ACC), and the steering wheel is
secured
with
a
clamping
designed for towing service.
NOTICE
The steering column is not strong
enough to withstand shocks trans-
mitted from the front wheels during
towing. Always unlock the steering
wheel before towing.
EMERGENCY SERVICE
NOTICE
After shifting the Auto Gear Shift
gearshift lever to the "N" position,
always check the gear position indi-
cator in the instrument cluster shows
the "N" position to make sure that the
transaxle is disengaged.
If the transaxle cannot be put in neu-
tral, turn the key from the "LOCK" to
the "ON" position or press the engine
switch to change the ignition mode to
ON, and move the Auto Gear Shift
gearshift lever from "N" to "D", "M"
or "R", then back to "N" again. Then
turn the key from the "ON" to the
"LOCK" position or press the engine
switch to change the ignition mode to
LOCK (OFF). These procedures may
help put the transaxle in neutral. If
the transaxle still cannot be put in
neutral, you cannot tow the vehicle
device
without using a towing dolly.
4-wheel drive (4WD)
Your vehicle should be towed under one of
the following conditions:
1) With all four wheels on a flat-bed truck.
2) With the front or rear wheels lifted and a
dolly under the other wheels.
8-12
75RM0-01E
Advertisement
Table of Contents
