Manual Transaxle Vehicle; Auto Gear Shift Vehicle; Gearshift Indicator (If Equipped) - Suzuki IGNIS Series 2016 Owner's Manual

Table of Contents

Advertisement

OPERATING YOUR VEHICLE
"N" indicator blinking
When the gear indicator lamp blinks "N",
you should depress the brake pedal and
shift the gearshift lever to "N" position.
"1st" indicator blinking
When the gear indicator lamp blinks "1st",
you should depress the brake pedal and
shift the gearshift lever to "N" position, then
shift to "D" or "M" position again a few sec-
onds later.
"R" indicator blinking
When the gear indicator lamp blinks "R",
you should depress the brake pedal and
shift the gearshift lever to "N" position, then
shift to "R" position again a few seconds
later.
3-33

Gearshift indicator (if equipped)

EXAMPLE
In the following cases, the gearshift indica-
tor is indicated on the information display
when the ignition switch is in "ON" position
or the ignition mode is ON.
• For manual transaxle vehicle, when the
gearshift lever is in a position other than
"N" (Neutral).
• For Auto Gear Shift vehicle, when using
the manual mode.
• For vehicles equipped with the cruise
control, when the system is not in use.
The electronic control system monitors
driving condition (such as vehicle speed
and/or engine revolution), and it shows
which gear position is optimal for your driv-
ing with the indication on the display.

Manual transaxle vehicle

If UP/DOWN arrow is indicated on the dis-
play while driving, we recommend you to
shift up or down the gear until the arrow
disappears. It is the optimal gear position
for a driving condition that reduces the
over revolution and stress to the engine,
and improves fuel consumption.
Auto Gear Shift vehicle (when using the
manual mode)
If UP arrow is indicated on the display while
driving, we recommend you to shift up the
75RM327
gear until the arrow disappears. It is the opti-
mal gear position for a driving condition that
reduces the over revolution and stress to the
engine, and improves fuel consumption.
For details on how to use the transaxle,
refer to "Using transaxle" in this section.
WARNING
The gearshift indicator is designed to
indicate optimal gear position for
your driving, however, a driver will
not be relieved from the duty of care
of driving operation or gear change
with this indicator.
To drive safe, do not gaze the gear-
shift indicator, pay attention to your
driving situation and shift up or down
if necessary.
75RM0-01E

Advertisement

Table of Contents
loading

Table of Contents