Table of Contents
Advertisement
BEFORE DRIVING
Battery replacement
If the transmitter becomes unreliable,
replace the battery.
To replace the battery of the transmitter:
(1)
1) Remove the screw (1), and open the
transmitter cover.
2) Remove the transmitter (2).
2-15
(2)
(3)
(2)
(3) Lithium disc type battery:
CR1616 or equivalent
3) Put the edge of a flat-bladed screw-
68LM248
driver in the slot of the transmitter (2)
and pry it open.
4) Replace the battery (3) so its + terminal
faces "+" mark of the transmitter.
5) Close the transmitter and install it into
the transmitter holder.
6) Close the transmitter cover, install and
tighten the screw (1).
7) Check that the door locks can be oper-
ated with the transmitter.
8) Dispose of the used battery properly
according to applicable rules or regula-
tions. Do not dispose of lithium batter-
ies with ordinary household trash.
WARNING
Swallowing a lithium battery may
cause serious internal injury. Do not
allow anyone to swallow a lithium
battery. Keep lithium batteries away
from children and pets. If swallowed,
contact a physician immediately.
NOTICE
• The transmitter is a sensitive elec-
tronic instrument. To avoid damag-
ing it, do not expose it to dust or
68LM249
moisture or tamper with internal
parts.
• When replacing the battery by
yourself, the transmitter could be
damaged affected by static electric-
ity. Discharge the static electricity
built up in your body by touching
metal before replacing the battery.
NOTE:
Used batteries must be disposed of prop-
erly according to applicable rules or regu-
lations and must not be disposed of with
ordinary household trash.
75RM0-01E
Advertisement
Table of Contents
