Low Engine Coolant Temperature Light (Blue Color); Oil Change Request Light - Suzuki IGNIS Series 2016 Owner's Manual

Table of Contents

Advertisement

Low engine coolant temperature
light (blue color)
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on and stays on if the engine is
cold, and goes off after the engine warms
up.
If this light still stays on after the engine
warms up, there is a problem with the sys-
tem.
Have your vehicle inspected by your
SUZUKI dealer.

Oil change request light

(if equipped)
54G344
Your vehicle has the oil life monitoring sys-
tem and related oil change request light
that alerts you to change the engine oil and
oil filter.
When this light comes on or blinks, change
engine oil and oil filter immediately.
For details on how to change the engine oil
and oil filter, refer to "Changing engine oil
and filter" in the "INSPECTION AND
MAINTENANCE" section.
This light comes on for several seconds
when the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON so you
can check that light is working.
If either of odometer reading or time is
reached to the value which is set by the
system, this light comes on when the igni-
tion switch or engine switch is in ON posi-
tion. In addition, the message is shown on
the information display to tell you it is nec-
essary to change the engine oil and oil fil-
BEFORE DRIVING
ter. When the engine oil and oil filter are
changed, and the oil life monitoring system
is reset, this light will go out.
Whenever the engine oil and oil filter are
changed, the light must be reset to monitor
the next oil change timing properly. The
light will go out after the reset. For the
resetting procedure, refer to "Information
display" in this section.
79JM007
NOTICE
Severe engine damage will result, if
you keep operating the engine after
this light comes on.
Change the engine oil and oil filter
immediately when the light blinks.
NOTE:
This light is used to facilitate the oil and oil
filter change according to the maintenance
schedule.
2-112
75RM0-01E

Advertisement

Table of Contents
loading

Table of Contents