Table of Contents
Advertisement
Downhill
1) Depress the brake pedal and shift the
gearshift lever to the "D" position. Make
sure that the gear is in 1st by checking
the gear position indicator.
2) Release the brake pedal and depress
the accelerator pedal slowly. Even if the
accelerator pedal is not depressed, the
clutch will be engaged when the vehicle
speed increases.
Using engine braking:
When driving on a downhill slope, down-
shifting is recommended. So you can use
engine braking.
By placing the gearshift lever in the "M"
position, the Manual (M) mode is selected,
and you can shift to a lower gear manually.
For details of downshift operation, refer to
"Upshift and downshift" in the "Manual (M)
mode".
Manual (M) mode
The gears are not shifted automatically. To
shift the transaxle, the driver must operate
the gearshift lever to the "+" or "–" direc-
tion. As for conventional manual transaxle
vehicles, releasing the accelerator pedal a
little may help the transaxle to shift
smoothly.
Upshift and downshift:
Upshifting
Pull the gearshift lever to the "+" direction
and release it. Every time the lever is oper-
ated, the transaxle is upshifting 1 step in
the order of 1st 2nd 3rd 4th 5th
gear.
OPERATING YOUR VEHICLE
Downshifting
Push the gearshift lever to the "–" direction
and release it. Every time the lever is oper-
ated, the transaxle is downshifted in the
order 5th 4th 3rd 2nd 1st gear.
The gear position is displayed on the gear
position indicator. The gear position indica-
tor shows the transaxle gear position.
Before starting off, always check the gear
position indicator to make sure that the
75RM258
transaxle is engaged in 1st or reverse,
then depress the accelerator pedal.
NOTE:
• To downshift smoothly, the engine runs
fast in some cases. This is done inten-
tionally by the system and is not mal-
function.
• When driving down a hill, downshift and
use the engine braking appropriately. If
necessary, continuous downshifting is
75RM259
3-28
75RM0-01E
Advertisement
Table of Contents
