Table of Contents
Advertisement
OPERATING YOUR VEHICLE
NOTICE
If water enters the rearview camera, it
may cause a malfunction or catch
fire.
Do not use high pressure water
around the camera.
NOTICE
This lens is hard coated to prevent
damage or discoloration. Damage or
discoloration of lens may obscure
the image.
• Do not use a brush to clean lens.
• Do not use alcohol, benzene or
thinner to clean the lens.
• Do not use wax on the camera lens.
NOTE:
If body wax gets on the camera lens, wipe
off the wax with a clean cloth dampened
with mild detergent diluted with water, and
then wipe the lens with a dry cloth.
3-73
How to use rearview camera
1) Turn the ignition switch to "ON" position
or press the engine switch to change
the ignition mode to ON.
2) Shift the gearshift lever in "R" position.
• The display automatically shows the
view behind the vehicle.
• When the gearshift lever is shifted
from "R" to another gearshift lever
position, the display returns to the
previous display.
NOTE:
The rearview camera display has first pri-
ority in any display mode. However, the
rearview camera display does not show
the rear view while the system is initializ-
ing.
Display range of rearview camera
The rearview camera display shows the
area behind the rear end of the tailgate.
The display cannot show objects which are
close to the bumper or under the bumper.
The rearview camera display cannot show
obstacles which are higher than the cam-
era. Upper parts of tall objects such as
road signs cannot be viewed on the dis-
play.
Display range of rearview camera
EXAMPLE
(1)
EXAMPLE
(1)
54P000370
(1) Display range
75RM0-01E
75RM293
Advertisement
Table of Contents
