Conditions To Stop The Engine Automatically - Suzuki IGNIS Series 2016 Owner's Manual

Conditions to stop the engine automatically

If all of the following conditions are met while the standby conditions are met, the engine is stopped automatically when the vehicle is
decelerating before stopping or when the vehicle is stopped.
Common
Manual
transaxle
When decelerating
before stopping
CVT
Common
Manual
transaxle
When the vehicle is
stopped
CVT
#: The engine may not be stopped automatically if the brake pedal was depressed lightly or strongly.
®
• The ABS or ESP system has not been activated.
• Brake booster vacuum pressure is normal.
• The clutch pedal is depressed, the gearshift lever is shifted into "N" position, and then the
clutch pedal is released when the vehicle speed is approximately 15 km/h (9 mph) or less.
• The brake pedal is sufficiently depressed. (#)
• The vehicle is decelerating to a speed of approximately 13 km/h (8 mph) or less.
• The steering wheel is not being operated.
• The accelerator pedal is not depressed.
• The vehicle is not being driven on a steep hill.
• The brake is not applied abruptly.
®
• The ABS or ESP system has not been activated.
• Brake booster vacuum pressure is normal.
• The gearshift lever is in "N" position.
• The clutch pedal is released.
• The steering wheel is not being operated.
• The brake was not applied abruptly before the vehicle was stopped.
• The brake pedal is sufficiently depressed. (#)
• The accelerator pedal is not depressed.
• The vehicle is not stopped on a steep hill.
OPERATING YOUR VEHICLE
3-42
75RM0-01E