Omron NX-series User Manual page 255

Variable name _EIP2_TargetNodeErr
Meaning CIP Communications2 Target Node Error Infor-
mation
Function Indicates that the connection for the Registered Target Node Information for CIP communications 2 was not es-
tablished or that an error occurred in the target Controller.
The array elements are valid only when the Registered Target Node Information is TRUE.
Array[x] is TRUE: A connection was not normally established with the target node for a target node ID of x (the
Registered Target Node Information is TRUE and the Normal Target Node Information is FALSE), or a connection
was established with the target node but an error occurred in the target Controller.
Array[x] is FALSE: The target node is not registered for a target node ID of x (the Registered Target Node Infor-
mation is FALSE), or a connection was normally established with the target node (the Registered Target Node
Information is TRUE and the Normal Target Node Information is TRUE). An error occurred in the target Controller
(the Target PLC Error Information is TRUE).
Data type ARRAY [0..255] OF BOOL
R/W access R
Variable name _EIP_NTPResult
Meaning NTP Last Operation Time
Function Gives the last time that NTP processing ended normally.
The time that was obtained from the NTP server is stored when the time is obtained normally.
The time is not stored if it is not obtained from the NTP server normally.
Data type Structure: _sNTP_RESULT
Members: DATE_AND_TIME
R/W access R
Variable name _EIP_NTPResult
Meaning NTP Operation Result
Function This variable shows if the NTP operation ended normally.
TRUE: Indicates an NTP normal end.
FALSE:Indicates that NTP operation ended in an error or has not been executed even once.
Data type BOOL
R/W access R
l Functional Classification: EtherNet/IP Communications Switches
Variable name _EIP_TDLinkStartCmd
Meaning Tag Data Link Communications Start Switch
Function Change this variable to TRUE to start tag data links for CIP communications 1.
It automatically changes back to FALSE after tag data link operation starts.
Note Do not force this switch to change to FALSE from the user program or from the Sysmac Studio.
It changes to FALSE automatically.
Data type BOOL
R/W access RW
Variable name _EIP1_TDLinkStartCmd
Meaning CIP Communications1 Tag Data Link Communi-
cations Start Switch
Function Change this variable to TRUE to start tag data links for CIP communications 1.
It automatically changes back to FALSE after tag data link operation starts.
Note Do not force this switch to change to FALSE from the user program or from the Sysmac Studio.
It changes to FALSE automatically.
Data type BOOL
R/W access RW
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Retained Not retained.
Retained Not retained.
Retained Not retained.
Retained Not retained.
Retain Not retained.
Global/local Global
Range of values TRUE or FALSE
Network Publish Published.
Member name .ExecTime
Global/local Global
Range of values Depends on data type.
Network Publish Published.
Member name .ExecNormal
Global/local Global
Range of values TRUE or FALSE
Network Publish Published.
Global/local Global
Range of values TRUE or FALSE
Network Publish Published.
Global/local Global
Range of values TRUE or FALSE
Network Publish Published.
Appendices
A
A - 81