Setting
IP address
Host name
Community name
Version
A-1-7
TCP/UDP Message Service Settings Display
l TCP/UDP Message Service Settings
Setting
TCP/UDP message
service
Port 1 - Port No.
Port 2 - Port No.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Description
Set the IP address of the SNMP manager.
(Set this setting if the Recognition method in the Trap 2 settings
is set to the IP address Option.)
Set the host name of the SNMP manager.
(Set this setting if the Recognition method in the Trap 2 settings
is set to the Host name Option.)
(You can use up to 200 single-byte alphanumeric characters,
dots, and hyphens with up to 63 single-byte alphanumeric char-
acters between dots.)
Set the community name.
(You can use up to 255 single-byte alphanumeric characters.)
Set the version of the SNMP manager.
•
SNMPv1
•
SNMPv2C
Description
Specify whether to use the TCP/UDP message service function.
When you select Do not use Option, you cannot use TCP/UDP
message to establish a connection from an external device.
Specify a TCP/IP port number or a UDP/IP port number used for
port 1. For the details on the port number range, refer to
9-3 TCP/UDP Message Service Specifications on page 9 - 4.
Specify a TCP/IP port number or a UDP/IP port number used for
Port 2. For the details on the port number range, refer to
9-3 TCP/UDP Message Service Specifications on page 9 - 4.
Appendices
Default
None
None
public
A
SNMPv2C
Default
Do not use
64000
64000
A - 13