Omron NX-series User Manual page 208

Appendices
Variable name
_EIP2_PortErr Communications
Port2 Error
_EIP_CipErr CIP Communications
Error
A - 34
Meaning
This is the error status variable for the
communications port 2.
It represents the collective status of the
following error flags.
•
_EIP2_MacAdrErr (Port2 MAC Ad-
dress Error)
•
_EIP2_LanHwErr (Port2 Communica-
tions Controller Error)
•
_EIP2_EtnCfgErr (Port2 Basic Ether-
net Setting Error)
•
_EIP2_IPAdrCfgErr (Port2 IP Address
Setting Error)
•
_EIP2_IPAdrDupErr (Port2 IP Address
Duplication Error)
•
_EIP2_BootpErr (Port2 BOOTP Serv-
er Error)
•
_EIP_DNSCfgErr (DNS Setting Error)
•
_EIP_DNSSrvErr (DNS Server Con-
nection Error)
•
_EIP_IPRTblErr (IP Route Table Error)
Note If a Link OFF Detected or Built-
in EtherNet/IP Processing Er-
ror occurs, it is recorded in the
event log and then the corre-
sponding bit turns ON.
Refer to A-4-5 Meanings of Er-
ror Status Bits on page A - 52
for the meanings of the error
status bits.
This is the error status variable for CIP
communications.
It represents the collective status of the
following error flags.
•
_EIP1_IdentityErr (CIP Communica-
tions1 Identity Error)
•
_EIP1_TDLinkCfgErr (CIP Communi-
cations1 Tag Data Link Setting Error)
•
_EIP1_TDLinkOpnErr (CIP Communi-
cations1 Tag Data Link Connection
Failed)
•
_EIP1_TDLinkErr (CIP Communica-
tions1 Tag Data Link Communications
Error)
•
_EIP1_TagAdrErr (CIP Communica-
tions1 Tag Name Resolution Error)
•
_EIP1_MultiSwONErr (CIP Communi-
cations1 Multiple Switches ON Error)
Note If a Tag Name Resolution Error
occurs, it is recorded in the
event log and this variable
changes to TRUE. Refer to
A-4-5 Meanings of Error Status
Bits on page A - 52 for the
meanings of the error status
bits.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Function Data type
WORD
WORD
Range of
Reference
values
16#0000 to page A - 62
16#00F0
16#0000 to page A - 63
16#00F0