Write Service For Variables - Omron NX-series User Manual

8 CIP Message Communications
CIP
status
0C
11
13
15
1F
20
8-5-2

Write Service for Variables

Specify service code 4D hex to write the value of the variable that is specified by the request path.
8 - 40
Meaning
OBJECT_STATE_CONFLICT
REPLY_DATA_TOO_LARGE
NOT_ENOUGH_DATA
TOO_MUCH_DATA
VENDOR_SPECIFIC_ERROR
INVALID_PARAMETER
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Add
status
8010 Downloading, starting up
8011 There is an error in tag memory.
--- The response exceeds the maximum re-
sponse length.
--- The data length was too short for the
specified service.
--- The data length was too long for the
specified service.
0102,2104 An attempt was made to read an I/O var-
iable that cannot be read.
0104,1103 The specified address and size exceed a
segment boundary.
8001 An internal error occurred.
8007 An inaccessible variable was specified.
8031 An internal error occurred. (A memory al-
location error occurred.)
8009 A segment type error occurred.
800F There is an inconsistency in data length
information in the request data
8017 More than one element was specified for
a variable that does not have elements.
8018 Zero elements or data that exceeded the
range of the array was specified for an
array.
8023 An internal error occurred. (An illegal
command format was used.)
8024 An internal error occurred. (An illegal
command length was used.)
8025 An internal error occurred. (An illegal pa-
rameter was used.)
8027 An internal error occurred. (A parameter
error occurred.)
•
8028
An attempt was made to write an out-
of-range value for a variable for which
a subrange is specified.
•
An attempt was made to write an un-
defined value to an enumeration varia-
ble.
Cause