Sysmac Studio Settings For The Built-In Ethernet/Ip Port; A-1-1 Tcp/Ip Settings Display; Tcp/Ip Settings Display - Omron NX-series User Manual

Appendices
A-1 Sysmac Studio Settings for the Built-
in EtherNet/IP Port
A-1-1

TCP/IP Settings Display

l IP Address - Port 1
Set an IP address for the built-in EtherNet/IP port 1.
Setting
IP address setting
method
*1
IP address
Subnet mask
*1. These settings are required if you set IP address setting method to Fixed setting.
*2. Refer to the NX-series Safety Control Unit / Communication Control Unit User's Manual (Cat. No. Z395)
for details on the IP address setting.
l IP Address - Port 2
Set an IP address for the built-in EtherNet/IP port 2.
Setting
Use Port 2
IP address setting
method
A - 2
Select one of the following IP address setting methods for
the built-in EtherNet/IP port 1.
•
Fixed setting
•
Obtain from BOOTP server.
•
Fix at the IP address obtained from BOOTP server.
Set the IP address for the built-in EtherNet/IP port 1.
Set the subnet mask for the built-in EtherNet/IP port 1.
*2
Select the check box to use the built-in EtherNet/IP port 2.
Select one of the following IP address setting methods for the
built-in EtherNet/IP port 2.
•
Fixed setting
•
Obtain from BOOTP server.
•
Fix at the IP address obtained from BOOTP server.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Description
Description
Default
Fixed setting
192.168.1.1
*2
255.255.255.0
Default
Selected
(use)
Fixed setting