Cip Object Services; Cip Objects Sent To The Built-In Ethernet/Ip Port; Identity Object (Class Id: 01 Hex) - Omron NX-series User Manual

Safety network controller communication control unit built-in function
Hide thumbs Also See for NX-series:
Table of Contents

Advertisement

8-4

CIP Object Services

This section shows services that specify the CIP object in the Request Path and access the CIP mes-
sage server function of the CIP Safety-compliant Communication Control Unit.
8-4-1

CIP Objects Sent to the Built-in EtherNet/IP Port

The following types of CIP objects can be sent to the built-in EtherNet/IP port.
Object name
Identity object
NX configuration object
TCP/IP interface object
Ethernet link object
Controller object
8-4-2

Identity Object (Class ID: 01 hex)

This object reads the ID information of the Communication Control Unit and resets the built-in Ether-
Net/IP port.
Use the route path to specify the port number (1 or 2) of the built-in EtherNet/IP port to access.
Service Codes
Specify the service to execute with the service code.
Service
Parameter name
code
01 hex
Get_Attribute_All
0E hex
Get_Attribute_Single
05 hex
Reset
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Reads ID information from the Communication Con-
trol Unit.
Resets the built-in EtherNet/IP port.
Controls NX Units.
Reads and writes TCP/IP settings.
Specifies and reads Ethernet settings.
Reads Ethernet status.
Gets the Controller status.
Changes the operating mode of the Controller.
Description
Reads the values of the attributes.
Reads the value of the specified attribute.
Resets the built-in EtherNet/IP port.
This parameter is used to reset the built-in EtherNet/IP port
when you change the IP address or other parameter settings
and want to apply them.
Input one of the following values for Request Service Data to
specify the reset method.
00 hex: Resets the built-in EtherNet/IP port.
02 hex: Clears the saved tag data link settings and resets the
built-in EtherNet/IP port.
8 CIP Message Communications
Function
Reference
page 8 - 11
page 8 - 28
page 8 - 28
page 8 - 31
page 8 - 37
8
Supported service
range
Class
Instance
Support-
Support-
ed
ed
Support-
Support-
ed
ed
Not sup-
Support-
ported
ed
8 - 11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-csg series

Table of Contents