Overall Project File Protection; Operating Procedure - Omron NX-series User Manual

5-2

Overall Project File Protection

You can place a password on a project file to protect your assets.
5-2-1

Operating Procedure

This section describes how to set a password for a project.
When you use Save As to save the project file, select the Enable password protection for the
project file Check Box to enable the password setting.
Use the following procedure to open a project for which a password is set.
If you try to open or import a project file for which a password is set, the Enter a password Dialog Box
is displayed.
Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for specific procedures.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
5 Security
5
5 - 3