Using Ftp Commands; Table Of Commands - Omron NX-series User Manual

(3) Enter FTP commands (underlined in the following diagram) to read and write files. The follow-
ing directory tree is used in this example.
/ (root directory)
MEMCARD1
ABC
ftp>ls
200 PORT command successful.
150 Opening ASCII mode data connection for 'file list'
usr
bin
MEMCARD1
dev
226 Transfer complete.
ftp:** bytes received in 0 seconds(**bytes/s)
ftp>cd MEMCARD1
250 CWD command successful.
ftp>get ABC/DEF.BIN
200 PORT command successful.
150 opening ASCII mode data connection for 'ABC/DEF.BIN'(**bytes).
226 Transfer complete
**bytes received in *.*** seconds(**bytes/s)
4-3-5

Using FTP Commands

This section describes the FTP commands which the host computer (FTP client) can send to the FTP
server of the built-in EtherNet/IP port.
There may be slight differences in the descriptions depending on the model of your workstation. Refer
to your workstation's operation manuals for details.
4-3-6

Table of Commands

The FTP commands which can be sent to the built-in EtherNet/IP port are listed in the following table.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
IP address of built-in EtherNet/IP port
C: \ >ftp 192.168.250.1
Connected to 192.168.250.1.
220 NX-CSG320 FTP server ready.
User (192.168.250.1: (none)) : user1
331 Password required for user1.
Password:
230 User user1 logged in.
ftp>
ftp> bye
221-
Data traffic for this session was 0 bytes in 0 files.
Total traffic for this session was 204 bytes in 0 transfers.
221 Thank you for using the FTP service on 192.168.250.1.
C: \ >
(subdirectory)
DEF.BIN(file)
4 SD Memory Card Operations
File names read.
Results
Change to
MEMCARD1 directory
Results
Get DEF.BIN from ABC
directory
Results
Results
Login name
Password
(hidden)
4
4 - 9