Omron NX-series User Manual page 158

10 SNMP Agent
l Interfaces Group
Subtree name
ifNumber
ifTable
ifEntry
ifIndex
ifDescr
ifType
ifMtu
ifSpeed
ifPhysAddress
ifAdminStatus
ifOperStatus
ifLastChange
ifInOctets
10 - 6
Standard [(identifier) attribute]
[(1) RO]
The number of network interfaces.
[(2) NA]
Interface entity table
[(1) NA]
Row data for interface information
The index is ifIndex.
[(1) RO]
A number used to identify the interface.
[(2) RO]
Information related to the interface (includes
manufacturer name, product name, and hard-
ware interface version).
[(3) RO]
The type of interface classified according to
the physical/link layer protocol directly under
the network layer of the protocol stack.
[(4) RO]
MTU value
The maximum size (in octets) of datagrams
that can be sent and received through this in-
terface.
[(5) RO]
Estimated bandwidth
If a stable, accurate value cannot be obtained
for the bandwidth, a nominal value is set in-
stead.
[(6) RO]
MAC address
The physical address directly under the net-
work layer of this interface
[(7) RW]
The preferred status of the interface.
You cannot send normal packets in the test-
ing state.
up (1)
down (2)
testing (3)
[(8) RO]
The current status of the interface.
You cannot send normal packets in the test-
ing state.
up (1)
down (2)
testing (3)
[(9) RO]
The sysUpTime (in 0.01 seconds) at the last
change in ifOperStatus for this interface.
The number of octets received through this
interface. This includes framing characters.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Specifications of im-
Support
plementation
Support- 3
ed
--- ---
--- ---
Support- 1 to 3
ed
Support- 10/100M Fast Ethernet
ed Port
Support- ethernet-csmacd (6)
ed
Support- 1500
ed
Support- 10000000/100000000
ed
Support- The MAC address of
ed the EtherNet/IP port
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.