Omron NX-series User Manual page 118

8 CIP Message Communications
Member name
Event priority
Event code
Code system
Event source details Event source details
Reserved1
Reserved2
Vendor code
Device type code
Product code
Additional informa-
tion
Reserved3
NX Unit Error
Member name
Index
Unit number
Event priority
Event occurred time
Product code
Event code
Additional informa-
tion
*1. These numbers are attached in the order that the errors occurred.
*2. Refer to Error Descriptions and Corrections in the NX-series Safety Control Unit / Communication Control
Unit User's Manual (Cat. No. Z395) for details.
Format for Error Response
Parameter name
Reply Service
Reserved
General Status
Size of Additional Status Size of Additional status
Additional status
*1. If the general status code in the response code is 0x1F (Vendor specific error), the value is 0x01.
*2. The value is stored only when the value of the Size of Additional Status is 0x01.
CIP Error Code
General status code (hex)
02
0C
13
15
1F
8 - 22
Event level
*2
Event code
Code system
Reserved
Reserved
Vendor code of the Unit where an error occurred
Device type code of the Unit where an error occurred
Product code of the Unit where an error occurred
Attached information for the error
Reserved
Index number of current error
Unit number
1 to 32: NX Unit
Event Level
Time when error occurred
Product code of Unit where error occurred
*2
Event code
Error additional information
Description
Reply to Get current error service
Reserved
Current error code defined by CIP USINT
Additional status
*1
Error code
Resource unavailable
Object state conflict
Not enough data
Too much data
Vendor specific error
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Meaning
Meaning
*1
Data type Value (hex)
USINT BA
USINT 00
Current error code
USINT
00 or 01
UINT
Additional status
Data Type
UINT
UDINT
UINT
UINT
UINT
UINT
UDINT
UDINT
UDINT
ARRAY[0.. 31]
OF BYTE
ARRAY[0...23]
OF BYTE
Data Type
UDINT
USINT
UINT
UDINT
UDINT
UDINT
ARRAY[0..31]
OF BYTE
*1
*2