Omron NX-series User Manual page 164

10 SNMP Agent
Subtree name
ipRouteMask
ipRouteMetric5
ipRouteInfo
ipNetToMediaTable
ipNetToMediaEntry
ipNetToMediaI-
fIndex
ipNetToMedia-
PhysAddress
ipNetToMedia-
NetAddress
ipNetToMedia-
Type
ipRoutingDiscards
l Ip Group: Icmp
Name
icmpInMsgs
10 - 12
Standard [(identifier) attribute]
[(11) RW]
The subnet mask value in relation to ipRou-
teDest.
For systems that do not support any subnet
mask values, this value is determined by the
address class of the ipRouteDest field.
When ipRouteDest is 0.0.0.0, this value also
becomes 0.0.0.0.
[(12) RW]
The alternative routing metric.
[(13) RO]
The MIB object ID for the routing protocol
used by this route. If not defined, set to {0.0}.
[(22) NA]
The IP address conversion table used to map
IP addresses to physical addresses.
[(1) NA]
Row data for the conversion table. The indi-
ces are ipNetToMediaIfIndex and
ipNetToMediaNetAddress.
[(1) RW]
The interface ID number for this entry. The
value of ifIndex is used for this value.
[(2) RW]
The media-dependent physical address.
[(3) RW]
The IP address that corresponds to the me-
dia-dependent physical address.
[(4) RW]
The address conversion method.
Other (1): A method other than the following
items.
Invalid (2): An invalid value.
Dynamic (3): Dynamic conversion.
Static (4): Static conversion.
[(23) RO]
The number of routing entries that were valid
but discarded. For example, if there was not
enough buffer space because of other routing
entries.
Standard [(identifier) attribute]
[(1) RO]
The total number of received ICMP messag-
es. This includes messages counted by icm-
pInErrors.
NX-series Communication Control Unit Built-in Function User's Manual (Z396)
Specifications of im-
Support
plementation
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- 0.0
ed
--- ---
--- ---
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
According to the stand-
Support-
ed ard.
Support- According to the stand-
ed ard.
Specifications of im-
Support
plementation
Support- According to the stand-
ed ard.