Wiring The Built-In Ethercat Port; Wiring The Built-In Ethernet/Ip Port - Omron NX701-1700 User Manual

Machine automation controller nx-series
Hide thumbs Also See for NX701-1700:
Table of Contents

Advertisement

4 Installation and Wiring
• DIN Track Insulation Spacers
NX-AUX01 (OMRON Corporation)
Three Spacers are included in one model.
10
6
Precautions for Correct Use
If you use DIN Track Insulation Spacers to install a CPU Rack, the height will be increased by
approximately 10 mm. Make sure that the CPU Rack and connecting cables do not come into
contact with other devices.
4-4-3

Wiring the Built-in EtherCAT Port

For information on wiring the built-in EtherCAT port, refer to the NJ/NX-series CPU Unit Built-in Ether-
CAT Port User's Manual (Cat. No. W505).
4-4-4

Wiring the Built-in EtherNet/IP Port

For information on wiring the built-in EtherNet/IP port, refer to the NJ/NX-series CPU Unit Built-in Ether-
Net/IP Port User's Manual (Cat. No. W506).
4 - 38
35
10
14.8
M4
NX-series CPU Unit Hardware User's Manual (W535)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx701-1600Nx-pd7001Nx701-1620Nx701-1720Nx-pa9001

Table of Contents