Sensor-Independent Settings; System - wtw inoLab Multi 9620 IDS Operating Manual

®
inoLab Multi 9620 IDS
Setting menu of the
®
VisoTurb
900-P
Menu item
System / General / Language
System / General / Audio signal
System / General / Brightness
ba77173e04 12/2017
tings are printed in bold.
Menu item
Calibration /
Calibration record
Calibration /
Calibration data
storage / Display
Calibration /
Calibration data
storage / Output to
USB flash drive or
printer
Calibration /
Calibration data
storage / Output to
RS232/USB
Calibration /
Calibration interval
Resolution
Reset

11.7 Sensor-independent settings

11.7.1 System

To open the Storage & config menu, press the <ENTER_> key in the measured
value display. After completing the settings, switch to the measured value dis-
play with <M>.
Default settings are printed in bold.
Setting
Deutsch
English
(more)
on
off
0 ... 15 ... 22
Possible Explanation
setting
- Displays the calibration record of the
last calibration.
- Displays the last calibration records
(max. 10)
- Outputs the stored calibration data
to the USB-A interface (USB Host,
e.g. USB memory device/USB
printer).
- Outputs the stored calibration data
to the USB-B interface (USB Device,
e.g. PC)
1 ... 30 ... Calibration interval for the turbidity
999 d sensor (in days).
The meter reminds you to calibrate
regularly by the flashing sensor sym-
bol in the measuring screen.
0.1 Resolution of the FNU/NTU display
1
- Resets all sensor settings to the
delivery condition (see section
11.8.1 R
SETTINGS
Explanation
Selects the menu language
Switches on/off the beep on keystroke
Changes the display brightness
Settings
ESETTING THE MEASUREMENT
, page 108).
105