Operation
26
5.
Change and confirm the setting with <><> and <ENTER>.
The seconds are highlighted.
6.
Change and confirm the setting with <><> and <ENTER>.
The time is set.
7.
If necessary, set the Date and Date format. The setting is made simi-
larly to that of the time.
8.
To make further settings, switch to the next higher menu level with
<ESC>.
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.
®
inoLab
Multi 9620 IDS
ba77173e04
12/2017