wtw inoLab Multi 9620 IDS Operating Manual page 119

®
inoLab Multi 9620 IDS
Connecting a USB
printer
Transmitting data
(options)
ba77173e04 12/2017
Suitable USB printers
Model
Citizen CT-S281
Seiko Instruments Inc. DPU-
S445*
Star SP700 with USB inter-
face**
* Recommended printer settings for
- Character Set : IBM Compatible
** Recommended printer settings for Star SP700:
- CodePage 437
- DIP switch 1...7: =ON, DIP switch 8: OFF
Details: see operating manual of your printer.
1. Connect the USB printer to the USB Host interface.
2. Connect the power pack to the Multi 9620 IDS (see section 3.3.2 C
NECTING THE POWER PACK
As soon as the USB printer is identified by the meter, the printer status
indicator [
The following table shows which data are transmitted to the interface in which
way:
Data Control
Current mea- Manual
sured values
of all con-
nected sen-
sors
Automatic, at
intervals
Stored mea- Manual
sured values
Type
Thermal transfer printer
Thermal transfer printer
Matrix printer
DPU-S445
/
CHARGING THE BATTERIES
] is displayed.
Operation / description
 With <PRT>.
 Simultaneously with every manual
storing process (see section 12.1 M
UAL STORAGE
 With <PRT_>.
Then you can set the transmission
interval
 Simultaneously with every automatic
storing process (see section 12.2
A
UTOMATIC DATA STORAGE AT INTER
, page 112).
VALS
 Displayed dataset with <PRT> after
calling up from the storage.
 All datasets with the function, Output to
USB flash drive or printer
(menu Data storage / Manual data
storage or Automatic data storage).
For details, see section 12.3.1 E
THE MEASUREMENT DATA STORAGE
115.
Transmitting data
Paper width
58 mm
58 mm
76 mm
:
, page 13).
, page 112).
-
ON
-
AN
-
DITING
, page
119