wtw inoLab Multi 9620 IDS Operating Manual page 131

®
inoLab Multi 9620 IDS
Data transmission to
USB printer does not
work
Error message,
Memory error 1
Time gets lost
ba77173e04 12/2017
Cause
– The USB-B interface is connected to
a PC
– Connected USB printer was not rec-
ognized
Cause
– Instrument storage was not found
Cause
– Buffer battery is empty
What to do if...
Remedy
– Disconnect the PC from the
USB-B interface
– Use suitable USB printer (see
section 13.2 T
RANSMITTING DATA
USB , page 118)
TO A PRINTER
– Check the printer settings (see
section 13.2 T
RANSMITTING DATA
USB , page 118)
TO A PRINTER
Remedy
– Please contact the service.
Remedy
– Change the buffer battery (see
section 14.1.1 G
ENERAL MAINTE
, page 123)
NANCE ACTIVITIES
-
131