wtw inoLab Multi 9620 IDS Operating Manual page 110

Settings
Conductivity
110
The following settings for conductivity measurements are reset to the default
settings with the Reset function:
Setting
Calibration interval
Measured parameter
Cell constant (c)
Temperature compensation
Reference temperature
Temperature coefficient (TC) of
the linear temperature compensa-
tion
TDS multiplier
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the <ENTER>
key.
inoLab
Default settings
150 d
ϰ
Depending on the connected measur-
ing cell:
-1
0.475 cm (calibrated)
-1
0.475 cm (set)
-1
0.100 cm
nLF
25 °C
2.000 %/K
1.00
ba77173e04
®
Multi 9620 IDS
12/2017