wtw inoLab Multi 9620 IDS Operating Manual page 78

Dissolved oxygen
Displaying the cali-
bration record
Calibration evalua-
tion
78
The calibration record of the last calibration is available in the menu Calibration
/ Calibration record. To open it in the measured value display, press the
<CAL_> key.
The calibration records of the last 10 calibrations are available in the menu Cali-
bration / Calibration data storage / Display. To open the Calibration menu in the
measured value display, press the <ENTER> key.
Menu item
Calibration /
Calibration data
storage / Display
Calibration /
Calibration data
storage / Output to
USB flash drive or
printer
Calibration /
Calibration data
storage / Output to
RS232/USB
After calibration, the meter automatically evaluates the current status of the
calibration. The evaluation appears on the display and in the calibration record.
For evaluation, the characteristic curve of the sensor that was
determined is compared to the characteristic curve of an ideal sen-
sor at similar environmental conditions (relative slope S):
S = S
sensor
An ideal sensor has a slope of 1.
Setting/ Explanation
function
- Displays the calibration records.
Further options:
 Scroll through the calibration
 Using <PRT>, output the dis-
 Using <PRT_>, output all cali-
 Quit the display with <ESC>.
 Switch directly to the measured
- Outputs the stored calibration data
to the USB-A interface (USB Host,
e.g. USB memory device/USB
printer).
- Outputs the stored calibration data
to the USB-B interface (USB
Device, e.g. PC)
/ S .
ideal sensor
®
inoLab Multi 9620 IDS
records with <><>.
played calibration record to the
interface USB-B (USB Device,
e.g. PC) or USB-A (USB Host,
e.g. USB printer).
bration records to the interface
USB-B (USB Device, e.g. PC) or
USB-A (USB Host, e.g. USB
printer).
value display with <M>.
ba77173e04 12/2017