wtw inoLab Multi 9620 IDS Operating Manual page 109

®
inoLab Multi 9620 IDS
ISE
Dissolved oxygen
ba77173e04 12/2017
The following settings for ISE measurements are reset to the default settings
with the Reset function:
Setting
AutoRead criterion
Ion type
Unit
Man. temperature
Alternative temperature
Method
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the <ENTER>
key.
The following settings for D.O. measurements are reset to the default settings
with the Reset function:
Setting
Calibration interval
Check interval
Measured parameter
Relative slope (S )
Rel
Salinity (value)
Salinity (function)
Number of cal. points
Resolution
DO % Saturation local
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the <ENTER>
key.
Default settings
high
Ag
mg/l
25 °C
off
Standard addition
Default settings
180 d
60 d
D.O. concentration (mg/l)
1.00
0,0
Off
1
0.1
off
Settings
109