Sensor-Independent Settings; System - wtw Multi 3420 Operating Manual

Operation
Overview
33
3 Select and confirm the Time menu with <><> and <MENU/
ENTER>.
The hours are highlighted.
4 Change and confirm the setting with <><> and <MENU/
ENTER>.
The minutes are highlighted.
5 Change and confirm the setting with <><> and <MENU/
ENTER>.
The seconds are highlighted.
6 Change and confirm the setting with <><> and <MENU/
ENTER>.
The time is set.
7 If necessary, set the Date and Date format. The setting is made
similarly to that of the time.
8 To make further settings, switch to the next higher menu level
with <ESC>.
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.
4.4

Sensor-independent settings

The Storage & config menu includes the following settings:
 System (see section 4.4.1).
 Data storage (see section 4.4.2)

4.4.1 System

The following sensor-independent meter characteristics can be
adjusted in the Storage & config/System menu:
 Menu language
 Beep on keystroke
 Loudness of the beep
 Illumination
 Brightness
 Interval of the automatic switchoff
 Data interface
 Clock and date function
 Reset of all sensor-independent system settings to the default con-
dition
Multi 3420
ba75864y18 01/2015