wtw inoLab Multi 9620 IDS Operating Manual page 22

Operation
22
The selection is done with the <><> keys. The current selection is dis-
played with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with <ENTER>. Example:
System
General
Interface
Clock function
Service information
Reset
01.09.2017 08:00
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with <ENTER>. Subsequently,
the setting can be changed with <><> and <ENTER>. Example:
General
Language:
Audio signal:
Brightness:
Temperature unit:
Stability control
:
01.09.2017 08:00
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>. Example: Display the Calibration
record function.
pH
Calibration record
Calibration data storage
Buffer:
Single-point calibration:
Calibration interval:
Unit for slope:
[ ] 2.00 4.01 7.00 10.01
i
01.09.2017 08:00
Deutsch
on
12
°C
on
TEC
yes
7 d
mV/pH
®
inoLab Multi 9620 IDS
ba77173e04 12/2017