Safety Information; Installation By Qualified Personnel; Radiotelephones; Modifications And Extensions Of The System - Sirona SINIUS Installation Requirements

Sirona Dental Systems GmbH
Installation Requirements SINIUS / SINIUS CS / SINIUS TS
63 22 668 D3561
D3561.021.01.06.02 12.2014
2

Safety information

2.1

Installation by qualified personnel

The installation of the supply connections must be carried out by qualified
Installation by qualified personnel
technicians only.
Electrical and water supply installations; reference for INST suction machines
WARNING
Professional installation
Comply with the national regulations for electrical installation
(e.g. IEC 60364-1, VDE 0100-100, IEC 60364-7-710, VDE 0100-710,
National Electrical Code).
Comply with the national regulations for water supply installations
(e.g. EN 1717) and sewage installations (e.g. EN 12056-1).
For suction lines: adhere to the specifications in the installation
instructions for "Suction machines".
2.2

Radiotelephones

Mobile RF communications equipment can affect electro-medical
equipment. Therefore, the use of mobile wireless phones in medical office
or hospital environments must be prohibited.
2.3

Modifications and extensions of the system

Modifications to this system which might affect the safety of the system
owner, patients, or other persons are prohibited by law.
For reasons of product safety, this product may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. The user assumes the risk of using non-approved accessories.
If any devices not approved by Sirona are connected, they must comply
with the applicable standards, e.g.:
● IEC 60950-1 for information technology equipment (e.g. PC) and
● IEC 60601-1 for medical electrical equipment.
The treatment center monitor must fulfill the requirements of the
IEC 60950-1 standard.
The loudspeaker port of the monitor may be connected only to a device
that complies with IEC 60950-1 (e.g. a PC) or
IEC 60601-1. Under no circumstances may it be connected to a stereo
system or the like.
If a system is created during the installation process, the requirements of
IEC 60601-1, 3rd edition, must be fulfilled. The person assembling the
system assumes responsibility for ensuring conformity, e.g. acc. to
Directive 93/42/EEC.
2 Safety information
2.1 Installation by qualified personnel
7