Sirona SINIUS Installation Requirements page 39

Sirona Dental Systems GmbH
Installation Requirements SINIUS / SINIUS CS / SINIUS TS
63 22 668 D3561
D3561.021.01.06.02 12.2014
Demonstration chair plate
For floors which do not permit permanent connection of the unit (e.g.
demo operation at a trade show, floor heating), installation on a steel
demo plate is possible.
The treatment center is screwed onto the steel plate using M10 screws.
If the demo chair plate is permanently installed and whenever it is used
for medical purposes, is must be screwed firmly to points C on the floor
using two screws.
Demonstration plate thickness: 10 mm
REF 63 08 717
4 Dimensions, technical data
4.4 Mounting plates
39