Table Of Contents - Synthes Battery Power Line II Instructions For Use Manual

Table of Contents

Table of Contents3
General Information5
Intended Use5
Battery Reamer/Drill II5
Battery Oscillator II5
Safety Instructions6
Unusual Transmissible Pathogens6
Servicing6
Precautions7
Locating of the Instrument or Fragments of Instruments7
Accessories/Scope of Delivery8
Storage and Transport8
Explanation of Symbols Used9
Drive Units10
Battery Oscillator II (530.710)11
Battery Reciprocator II (530.715)12
Battery for Battery Power Line II13
Compatibility between BPL and BPL II Batteries14
Existing BPL Batteries Are Compatible with BPL II Handpieces14
Universal Battery Charger II15
Battery Pack16
(Battery Casing with Inserted Battery)16
Circulating Person18
Scrubbed Person19
Removing and Disassembling the Battery Pack21
Charging, Storing and Using Batteries22
Storage22
Battery Reamer/Drill II (530.705)24
Insert Attachment25
Remove Attachment25
Attachments for Battery Reamer/Drill II25
Drill Attachments26
Color Marking on the Attachments26
Ream Attachments26
Precaution27
Maximum Speed28
Maximum Torque28
Cannulation28
Insert Instrument28
Drill Chuck, Keyless, Drill Speed (530.731)29
Remove Instrument29
AO/ASIF Quick Coupling for Drill Bits, Drill Speed (530.750)30
Quick Coupling for DHS/DCS Triple Reamers, Drill Speed (530.760)31
Drilling/Reaming Attachments32
Trinkle Quick Coupling (530.794), Drill Speed33
Trinkle Quick Coupling (530.784), Ream Speed33
Trinkle QC XXL, Modified (530.795), Ream Speed33
AO/ASIF Quick Coupling for Reamers, Reaming Speed (530.780)34
Quick Coupling for Kirschner Wires and for Pins, Drill Speed (530.791)35
Insert Kirschner Wire/Guide Pin into Attachment36
Insert Kirschner Wire/Guide Pin into Bone36
Remove Kirschner Wire/Guide Pin from Bone36
Quick Coupling for Pins, Drill Speed (530.796)37
Insert Guide Pin into Attachment37
Insert Guide Pin into Bone37
Radiolucent Drive (511.300) and Adapter for Radiolucent Drive38
Assemble Radiolucent Drive38
Disassemble Radiolucent Drive38
Insert Drill Bits39
Remove Drill Bits39
Using the Radiolucent Drive39
Battery Oscillator II (530.710)41
Battery Reciprocator II (530.715)44
Instructions for Handling Saw Blades46
Cleaning and Disinfection49
Preparation Prior to Reprocessing49
Cleaning and Disinfection of the Battery and Charger49
Manual Cleaning Instructions50
Remove Debris50
Manipulate Moving Parts50
Spray and Wip51
Rinse with Tap Water51
Clean with Detergent51
Wipe/Spray Disinfection52
Visually Inspect Device52
Final Rinse with De-Ionized/Purified Water52
Automated Cleaning Instructions with Manual Pre-Cleaning53
Load Synthes Washing Basket55
Automated Cleaning Cycle Parameters58
Inspect Device58
Maintenance and Lubrication59
Lubricating the Attachments64
Inspection and Function Test65
Packaging, Sterilization and Storage66
Sterilization67
Repairs and Technical Service69
Disposal of Waste70
Troubleshooting71
System Specifications77
Duty Cycle78
Electromagnetic Compatibility81
Immunity82
Recommended Separation Distances85
Separation Distance According to Frequency of Transmitter85
Ordering Information86
Cutting Tools86
Example Battery Power Line II Set – Joint Replacement87
Example Battery Power Line II Set – Trauma87