Quick Coupling For Dhs/Dcs Triple Reamers, Drill Speed (530.760) - Synthes Battery Power Line II Instructions For Use Manual

Battery driven power tool system for orthopedics and traumatology

Hide thumbs Also See for Battery Power Line II:

Table of Contents

Quick Coupling for DHS/DCS Triple Reamers,

Drill Speed (530.760)

Maximum speed:

approx. 930 rpm

Maximum torque:

approx. 6.0 Nm

Cannulation:

B 3.2 mm

Accepts cutting tools and instruments with a large quick

coupling fi tting. These include DHS/DCS triple reamers,

large quick coupling screwdriver shafts, large quick

coupling cannulated drill bits for Synthes intramedullary

nailing systems and the Synthes Reamer/Irrigator/Aspira-

tor (RIA) system.

Technical data is subject to tolerances.

Figure 1

Insert instrument

Push forward on the collar of the attachment and insert

the instrument, turning it slightly to align the instrument

(Fig. 1).

Release the collar, pulling lightly on the instrument to

ensure it is secure.

Remove instrument

Push forward on the collar of the attachment and

remove the instrument (Fig. 1).

Battery Power Line II Surgical Technique DePuy Synthes

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the Battery Power Line II and is the answer not in the manual?