Synthes Battery Power Line II Instructions For Use Manual page 76

Battery driven power tool system for orthopedics and traumatology

Hide thumbs Also See for Battery Power Line II:

Table of Contents

Troubleshooting

Problem

Guide pin cannot be inserted into

the front of the Quick Coupling for

Pins attachment (530.796) or cannot

be grasped

Bone and cutting tool becomes ex-

cessively hot

If the recommended solutions do not work, send the power tool to your local Synthes Service Center.

For further technical questions or information on our services, please contact your Synthes representative.

For troubleshooting for the Universal Battery Charger II please consult the relevant instructions for use

(DSEM/PWT/1114/0050).

DePuy Synthes Battery Power Line II Surgical Technique

Possible causes

Diameter or shaft geometry is un-

suitable

Cutting tool is blunt

Solution

Quick Coupling for Pins (530.796)

allows insertion and removal of

B 3.2 mm guide pins with round,

triangular or flat shafts only

Replace cutting tool

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the Battery Power Line II and is the answer not in the manual?